| |
Fully Automatic Cutting Machine For Power Chords
|
| |
1) Model No. CTO 13
2) Corrugated Tubes
3) Model No. CTO 16 |
| |
|
 |
Fully Automatic Machine (Pneumatically Operated, Compressed air required). Suitable for cutting of Single Core wires, multicore Cables, Corr tubes, and PVC Sleeves, Small metal wires and strips.
| Benefits : |
* Fully automatic machine.
* Auto Setting as well as Auto Running.
* High Quality + High Output
* At Low cost
* Small in size
* Saves Labour and
* Reduces copper wastage |
|
|
| |
| Performance Range :- |
| Length Selection |
5mm to 25meters in steps of 1mm |
| Accuracy |
± 2mm OR ± 0.2 % of length |
| Suitable For |
Wire Up to 6 Sq.mm,
Cables up to 7mm OD.
(Contact us for sizes outside this range).
Heat shrink sleeves.
Plastic tubes. |
| Wire Types |
Multistrand, multicore unarmored COPPER/Alu wires |
| Changeover setting time |
5 sec max (Digital Setting) |
|
| |
 |
| |
| Technical Data :- |
| Mechanical system |
Portable machine with no-maintenance, precision mechanical system |
| Electronic system |
Microprocessor Controls |
| Wire feed system |
1 stepping motors with 2 feed rollers, variable speed |
| Cutting & Stripping system |
Pneumatically Operated |
| Length Measurement system |
Directly by stepping motor control and feedback by low resolution encoder (optional) |
| Power |
220V / 50 Hz, other options upon request |
| Compressed air |
(5 to 7 bar, 70 to100 psi), |
| Dimensions |
330mm x 450mm x 420mm(H) |
|
| |
| ------------------------------------------------------------------------------------------------------------------------------------------------------ |
| |
| Model No: Corrugated Tubes |
|
| The machine uses a specially developed unique cutting mechanism and belt feeding system. Both these ensure that the hollow tubes do not collapse during feeding or cutting. |
 |
This machine is tabletop, user-friendly, and automatic. It is available with Microprocessor controls. A simple and smart keypad and display is used for setting the length, target quantity, batch qty etc. It comes with in-built production counter, which indicates the number of cuts taken.
* The standard machines can cut corrugated tubes from 5mm diameter to 32 mm dia.
* It can cut around 2000 tubes of 100 mm length per hour.
* The machine cuts tubes within ± 2mm accuracy and gives a good cut.
* The machine works on single phase electric supply and 5 bar pneumatic supply. |
|
| |
| Performance Range :- |
| Tube Type |
Corrugated Tubes: from 5mm dia to 32 mm dia. |
| Length Selection |
Standard range: 5 mm to 9 meters, in steps of 1mm;
You will have to ensure knot-free supply of tube to machine. |
| Accuracy |
+/- 0.3% (min. +/-2mm ) |
| Changeover setting time |
4 minutes typically. |
|
| Technical Data :- |
| Mechanical system |
Rugged machine with precision mechanical system |
| Electronic system |
Separate electronic control with PLC and drives |
| Tube feed system |
1 stepping motor with 2 feed belts, variable speed |
| Cutting system |
Pneumatic Cylinder and Solenoid Valve With Simple cutter. Uses standard blade available in stationery shops |
| Length Measurement system |
Directly by stepping motor control |
| Power |
220V / 50 Hz, other options upon request |
| Compressed air |
5 to 6 bar, 25 lpm (0.5 hp compressor) |
| Dimension |
450mm X 450mm X 435mm(h) , approx |
|
| Production Speed :- |
Length |
100 mm |
500mm |
1000mm |
Output |
2000/Hr |
1200 /Hr |
1000/Hr |
|
* Speed for 5 mm Corr-tube
Voltage servo-stabilizer (2KVA) or CVT (1KVA) is must. Proper earthing is essential |
| ------------------------------------------------------------------------------------------------------------------------------------------------------ |
|
Fully Automatic Machine Suitable for cutting of Single Core wires, multicore Cables, Corr tubes, and PVC Sleeves, Small metal wires and strips. |
 |
| Benefits : |
* Fully automatic machine.
* Auto Setting as well as Auto Running.
* High Quality + High Output
* At Low cost
* Small in size
* Saves Labour and
* Reduces copper wastage |
|
|
| Performance Range : |
| Length Selection |
5mm to 25meters in steps of 1mm |
| Accuracy |
± 2mm OR ± 0.2 % of length |
| Suitable For |
Wire Up to 6 Sq.mm,
Cables up to 7mm OD.
(Contact us for sizes outside this range).
Heat shrink sleeves.
Plastic tubes. |
| Wire Types |
Multistrand, multicore unarmored COPPER / Alu wires |
| Changeover setting time |
5 sec max (Digital Setting) |
|
| |
|
| |
| Technical Data : |
| Mechanical system |
Portable machine with no-maintenance, precision mechanical system |
| Electronic system |
Microprocessor Controls |
| Wire feed system |
1 stepping motors with 2 feed rollers, variable speed |
| Cutting & Stripping system |
Pneumatically Operated |
| Length Measurement system |
Directly by stepping motor control and feedback by low resolution encoder (optional) |
| Power |
220V / 50 Hz, other options upon request |
| Compressed air |
(5 to 7 bar, 70 to100 psi), |
| Dimensions |
330mm x 450mm x 420mm(H) |
|
